JR XP9303 Transmitter

The long awaited JR sailplane radio has been released. The new benchmark.

9-channel, 30-model memory and 3-model types at affordable prices. Sailplane software designed by Joe Wurts.

System Features

• Model Transfer System

• Model Copy System

• Switch Assignment

• 5 Flight modes

• Dual slide levers

• Dual rates (triple with flight modes)

• Adjustable trim rates

• Fail Safe

• Modulation - PCM or FM

• 3 Timers

• Direct Servo Control System

• Rolling Selector System to scroll through programming

Sailplane Software Features

• Five flight modes

• Labeled Modes: Launch/land/Speed/Thermal/Cruise

• Trim system offers presets for ail/ele/rud/flaps/flaperon for each mode

• Elevator-flap for each mode

• Aileron-flap for each mode

• Adjustable Flaperon through side lever for each mode

• Adjustable Flap rate through side lever for each mode

• 2 available Butterfly mixes assignable to stick or mode

• Multi point Spoiler to Elevator mix assigned to mode

• Camber end points adjustable for each flight mode

• Camber control assignable to side levers or throttle stick

• Aileron and Flap differential (inc reverse differential) for each mode

• Motor hold System assignable to each mode

• V-Tail mix

• Launch/Land flight mode Override System

$529.95

Specify frequency when ordering

Specify frequency when ordering

Specify frequency when ordering

Fits Mpx 3000-4000, Stylus, 10X, JR 9303, EVO and others

Install Instructions for Evo adapter

Adapter to JR 9303

$55

Volz MMX digital

All metal gears
Ball bearings
Weight: .67 oz.
Voltage: 4.8 - 6.0 volts
Torque: 56-67 oz. in.
Speed: .18 - .13 sec 60

Steel/metal gears
Ball bearings
Weight: .67 oz.
Voltage: 4.8 - 6.0 volts
Torque: 67-82 oz. in.
Speed: .18 - .13 sec 60°

Volz  Wing Maxx

All metal gears
Ball bearings
Weight: .67 oz.
Voltage: 4.8 - 6.0 volts
Torque: 42-49 oz. in.
Speed: .15 - .11 sec 60°

Steel/metal gears
Ball bearings
Weight: .67 oz.
Voltage: 4.8 - 6.0 volts
Torque: 51-59 oz. in.
xSpeed: .15 - .11 sec 60°

Torque: 46.6oz (4.8v)
Speed: .14sec/60 (4.8v)
Dimensions: 0.34 x 1.33 x 1.18 in
Weight: .7 oz
Bearing: Dual
Motor Type: Cored
Gears: Brass, Alloy, and Plastic combo
Deadband: less than 1us

Torque: 17 oz/in
Speed: .18 sec/60°
Dimensions: 0.45 x 0.87 x 0.85
Weight: .32
Bearing: N/A
Motor Type: 3-pole Ferrite
 

Torque: 17 oz/in
Speed: .23 sec/60°
Dimensions: .45 x .85 x .87 in
Weight: .32 oz
Bearing: n/a
Motor Type: cored ferrite
Gears: Nylon

Torque: 31.9 oz/in
Speed: .24 sec/60°
Dimensions: 0.50 x 1.12 x 1.17in
Weight: .63 oz
Bearing: n/a
Motor Type: 5-pole Ferrite 

Torque: 53.0 oz/in
Speed: .21 sec/60°
Dimensions: 0.50 x 1.12 x 1.17in
Weight: .80 oz
Bearing: n/a
Motor Type: Cored